BOYSEN® Chalk It™ Water-based Chalkboard Paint |
|
BOYSEN® Chalk It™ Water-based Chalkboard Paint |
|
|
|
DESCRIPTION: BOYSEN® Chalk It™ is a water-based latex paint that makes any concrete, drywall, and properly primed wood into a chalkboard surface. It is low odor, low-VOC, and easy to clean. It comes in a luxurious black shade that makes it ideal for accent walls in cafes, restaurants, and other establishments. PRINCIPAL USES: It is formulated for interior concrete, drywall, and wooden surfaces. SERVICE CONDITIONS: Allow paint to dry for at least a week before writing on the surface. Wipe chalk markings off using moderate pressure. If thorough cleaning is needed, use a soft cloth with any gentle household cleaners. Do not use abrasive cleaners as these may damage the paint film. It is not recommended to use oil pastels, crayons, or chalk markers for BOYSEN® Chalk It™. FINISH: Matte
DRY TIME:
THEORETICAL COVERAGE PER 1-LITER: 7 - 9 sq.m. THINNING SOLVENT: Use as supplied. CLEAN-UP SOLVENT: Water PACKAGING: 1-Liter APPLICATION: By brush, roller, or airless spray |
|
DESCRIPTION: BOYSEN® Chalk It™ is a water-based latex paint that makes any concrete, drywall, and properly primed wood into a chalkboard surface. It is low odor, low-VOC, and easy to clean. It comes in a luxurious black shade that makes it ideal for accent walls in cafes, restaurants, and other establishments. PRINCIPAL USES: It is formulated for interior concrete, drywall, and wooden surfaces. SERVICE CONDITIONS: Allow paint to dry for at least a week before writing on the surface. Wipe chalk markings off using moderate pressure. If thorough cleaning is needed, use a soft cloth with any gentle household cleaners. Do not use abrasive cleaners as these may damage the paint film. It is not recommended to use oil pastels, crayons, or chalk markers for BOYSEN® Chalk It™. FINISH: Matte
DRY TIME:
THEORETICAL COVERAGE PER 1-LITER: 7 - 9 sq.m. THINNING SOLVENT: Use as supplied. CLEAN-UP SOLVENT: Water PACKAGING: 1-Liter APPLICATION: By brush, roller, or airless spray |
|
SURFACE PREPARATION: New Concrete Allow new concrete to dry for 14 - 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer. Drywall Substrates Install and secure joints as per manufacturer’s recommendations. Wooden Substrates Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting. Repainting Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN® Paint and Varnish Remover B-141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry. For repainting concrete with chalky old paint, use BOYSEN® Chalk Blocker™ B-7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry. For repainting wooden surfaces, prime with BOYSEN® WoodPrime™ B-180 before recoating. PAINTING SCHEDULE: Concrete Substrates Primer: BOYSEN® Permacoat™ Flat Latex B-701 Putty: BOYSEN® Masonry Putty B-7311 2nd & 3rd coat: BOYSEN® Chalk It™ Drywall Substrates Primer: BOYSEN® Permacoat™ Flat Latex B-701 2nd & 3rd coat: BOYSEN® Chalk It™ Wooden Substrates Primer: BOYSEN® WoodPrime™ B-180 Putty: BOYSEN® Masonry Putty B-7311 2nd & 3rd coat: BOYSEN® Chalk It™ |
© 2018 Boysen Paints. All Rights Reserved. | Privacy Policy
© 2018 Boysen Paints. All Rights Reserved.