BOYSEN® Acrytex™ Sealer B-1708 |
|
BOYSEN® Acrytex™ Sealer B-1708 |
|
|
|
DESCRIPTION: BOYSEN® Acrytex™ Sealer is an acrylic solvent-based sealer intended for concrete surfaces situated in humid and cold climates.
THEORETICAL COVERAGE PER 4-LITERS: TINTING: Not applicable
THINNING SOLVENT:
CLEAN-UP SOLVENT: PACKAGING: 4-Liters APPLICATION: By brush, roller or spray |
|
DESCRIPTION: BOYSEN® Acrytex™ Sealer is an acrylic solvent-based sealer intended for concrete surfaces situated in humid and cold climates.
THEORETICAL COVERAGE PER 4-LITERS: TINTING: Not applicable
THINNING SOLVENT:
CLEAN-UP SOLVENT: PACKAGING: 4-Liters APPLICATION: By brush, roller or spray |
|
SURFACE PREPARATION:
For repainting concrete, use BOYSEN® Chalk Blocker™ B-7304 as surface conditioner if surface is chalky. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.
PAINTING SCHEDULE:
Plain Finish
1. Apply BOYSEN® Acrytex™ Sealer B-1708 directly onto bare concrete substrate
2. Prime resulting surface with BOYSEN® Acrytex™ Primer B-1705
3. Putty minor surface imperfections with BOYSEN® Acrytex™ Cast B-1711
4. Spot prime puttied areas with BOYSEN® Acrytex™ Primer B-1705
5. Finish with at least 2 coats of BOYSEN® Acrytex™ Topcoat to desired sheen
Textured Finish
1. Apply BOYSEN® Acrytex™ Sealer B-1708 directly onto bare concrete substrate
2. Prime resulting surface with BOYSEN® Acrytex™ Primer B-1705
3. Spray BOYSEN® Acrytex™ Cast B-1711 using a mortar gun. For a flattened texture, press Acrytex™ Cast B-1711 using a plain wooden roller 10-15 minutes after spraying.
Note: Dampen wooden roller with water to prevent the roller from sticking to the cast.
4. Finish with at least 2 coats of BOYSEN® Acrytex™ Topcoat to desired sheen
|
© 2018 Boysen Paints. All Rights Reserved. | Privacy Policy
© 2018 Boysen Paints. All Rights Reserved.